A dealership's floorplan interest accrues on every unit on the lot whether it sells this week or not. A repair shop's insurance and warranty claims can take a month or more to reimburse work that's already done. This matrix filters 92 lenders down to the ones who actually underwrite around both.
Every entry here cleared the same bar: will it lend against floorplan inventory or shop receivables, does it understand insurance and warranty payment timing, and how fast can it move once a shop or lot actually needs the capital.
AI-powered underwriting with no minimum credit score requirement. Decisions issued in as little as 3 hours based entirely on monthly business revenue, with a rate-match guarantee and zero paperwork.
Working capital loans, MCAs, equipment financing, and SBA products available from a single lender. 4-hour approval with transparent fees and no hidden costs. In operation since 2010.
10-minute application with no hard credit pull. OnDeck reports to all three business credit bureaus, helping you build business credit as you repay. Renewal available after 6 months.
Over $3 billion funded to US small businesses since 2006. Offers term loans, lines of credit, revenue-based financing, equipment leasing, and SBA loans — all with no prepayment penalties.
Revenue-based approval accepts credit scores from 500, focusing on business cash flow rather than personal credit history. Early payoff discounts reduce your total cost of capital.
Sets no minimum credit score and still turns applications around in about four hours, with funding as fast as the same day terms are accepted. All costs are disclosed upfront before signing.
A dealership pays floorplan interest on every unit from the day it arrives, whether it sells today or in ninety days. A repair shop finishes the work first and waits on an insurer or manufacturer to pay for it after. Four points across the year expose both gaps.
Used-vehicle demand spikes as tax refunds fund down payments, so lots need inventory ready to move well before the season's traffic actually arrives.
Floorplan lenders require dealers to pay down aged units on a schedule regardless of whether they've sold, while shops enter the spring maintenance rush needing parts and techs staffed ahead of it.
Insurance direct-repair work and manufacturer warranty claims submitted this quarter often take 30 to 45 days to reimburse, while shop payroll and overhead run on their usual schedule.
Dealers push to turn aged floorplan units before year-end audits, and shops see a winter repair bump, batteries and heating systems especially, while Q3's insurance claims are often still in the queue.
Auto is one of the few industries where two entirely different timing problems coexist: interest accruing on unsold inventory, and work already finished but not yet paid for. Here's where each tends to bite.
Parts often move at thin margin, so a shop's profitability leans on billable labor hours. A slow week of comebacks or warranty work can strain overhead faster than the parts side ever would.
A broken lift or a diagnostic scanner going down doesn't slow one job, it takes an entire bay out of service until it's fixed, which makes the repair urgent regardless of that week's cash position.
Floorplan financing runs on a daily interest clock per vehicle, so an aging unit isn't just tying up capital, it's actively costing the dealership money the longer it sits unsold.
A shop completes insurance-approved or manufacturer warranty repairs on the customer's timeline, but reimbursement from the payer often runs 30 to 60 days behind the actual work.
A wholesale auction lot or a fleet buyout can offer inventory well below retail, but that opportunity is gone within hours if the cash isn't already available to move on it.
Adding service bays, taking over a struggling competitor's lease, or acquiring another shop's customer list all surface on their own timeline, independent of how much cash has been set aside.
A captive finance arm built for franchise floorplan often won't touch a repair shop's receivables, and a general small-business lender rarely understands per-unit floorplan curtailment. Finding that out one application at a time costs real time.
Floorplan inventory is only one piece. Here's how financing typically gets allocated across a shop or a dealership, and which product tends to fit each need.
Techs and sales staff are paid on a fixed cycle regardless of whether a warranty claim has cleared or a curtailment payment is due that same week.
Auction purchases and trade-ins have to be paid for at acquisition, well before a retail sale. A floorplan line finances that inventory on a per-unit basis.
Common repair parts get ordered ahead of demand to keep turnaround times competitive, which ties up cash that a revolving credit line can offset.
Shop equipment can serve as its own collateral, which typically clears underwriting faster than an unsecured request would.
Adding a second location, buying out a competitor's shop, or acquiring a dealership needs a large lump sum committed up front and repaid over several years.
Shops and dealers who leaned on several quick advances during a slow claims cycle often return a year later to combine them into one lower-cost term loan.
Each card links to a ranking built specifically for auto repair and dealership borrowers, not a general small-business list with the same lenders reshuffled.
Finance a lift, an alignment machine, or a diagnostic scanner with the asset itself as collateral, preserving cash for parts and payroll.
Keep payroll and overhead current through a slow labor month or a stretch of pending insurance claims, with most shops approved within 24 hours.
A revolving buffer against uneven claim timing or parts demand, drawn only when a gap actually shows up and repaid as revenue lands.
Lower rates and longer terms for a shop acquisition, a dealership purchase, or a facility expansion, in exchange for a slower, document-heavy approval process. SBA lending is a common path independent operators use to buy an existing shop or lot.
Built specifically for dealership vehicle inventory. Finances each unit individually with a per-vehicle curtailment schedule, so a lot can stock ahead of demand without tying up working capital.
Not sure yet which category fits your shop or lot? Compare general small business loan options across every lender and size, then narrow from there.
A term loan delivers a fixed sum for a known, one-time cost. A line of credit sits ready for whenever a claim delay or a parts order actually needs it. Most shops and dealers end up using both, just for different needs.
Weighting differs lender to lender, but the general shape of what's required holds across most of the matrix.
Best for a shop or dealership acquisition where total cost matters more than speed, and the business can wait two to six weeks for approval.
Best when the lift, tool, or system itself can secure the loan, which tends to offset a thinner credit file.
Best for payroll or a curtailment payment during a slow claims cycle, where revenue history matters more than a clean credit score.
Best for a fast, revenue-based need with little formal credit history to underwrite against.
Ranges reflect typical published criteria across the lenders in our matrix and can shift by lender; exact requirements are confirmed at the offer stage, not before.
A complete file up front is what separates a same-day offer from a week of back-and-forth.
Loan purpose, amount, and how long you've operated. The intake runs on a soft check and takes about two minutes, with no impact to your credit.
The matrix filters out anything below your revenue or credit tier automatically, leaving a short, comparable list of real offers.
Origination fees and effective APR are shown next to the monthly figure, since the payment alone rarely tells the full story.
Working capital and equipment lenders in our matrix can often release funds same-day post-approval; SBA and larger term loans take longer.
A lender who won't underwrite per-vehicle floorplan or shop receivables doesn't make this matrix, no matter how competitive their general small-business rate looks on paper.
Origination fees and effective APR sit next to the monthly payment figure, since the payment alone rarely represents what the financing actually costs.
Matching happens before any lender touches your real credit file, so comparing offers here doesn't cost you anything toward the loan you end up choosing.
Placement reflects how well a lender matches your file, not which one pays the biggest commission for the spot — a distinction not every comparison site in this space makes.
Credit thresholds, revenue floors, and funding timelines are pulled from each lender and rechecked monthly rather than estimated from outdated marketing copy.
Rates and eligibility windows in this segment shift often, so the matrix is rebuilt on a rolling basis instead of published once and left to go stale.
The underwriting logic holds across the board, but typical deal size and collateral shift by business type. Find the guide closest to your shop or lot.
Equipment financing, working capital
Floorplan financing, auction buying
Facility expansion, floorplan lines
Insurance DRP reimbursement lag
High-volume parts stocking
Niche parts and equipment financing
Floorplan for higher-ticket units
Net-terms client receivables
No. Matching against the lender matrix runs on a soft inquiry only. A hard pull happens only once you formally accept a specific lender's offer and move into their underwriting.
It depends on the product. Working capital and equipment-secured loans in our matrix commonly fund same-day once approved; standard term loans typically take a few business days; SBA-backed loans can run several weeks.
Yes. Floorplan and inventory financing is built specifically for vehicle dealers: it finances each unit individually against a curtailment schedule so a lot can stock ahead of demand without tying up cash reserves.
Less than most shop owners assume. Lenders here generally underwrite against overall monthly revenue rather than a single claim's payment status, so a normal reimbursement lag rarely disqualifies a file on its own.
No. Several revenue-based and equipment-secured products on this page set no fixed floor at all and underwrite primarily against cash flow and, for dealers, floorplan performance.
The list narrows but isn't empty. Some lenders waive the standard time-in-business requirement and weigh personal credit history and current deposits more heavily instead.
A term loan is generally the lower-cost option for a known, one-time expense like new equipment. A line of credit costs more per dollar drawn but only charges interest on what's actually used, which suits a recurring, unpredictable need like a parts order or a claim delay.
Not in every case. Floorplan lines are secured by the vehicles themselves, and equipment loans by the equipment. Working capital and revenue-based products are more often unsecured, backed by a personal guarantee instead.
A single soft-check submission is all it takes to see which of the 92 lenders in our matrix actually work with a shop's or a dealer's revenue cycle — no origination markup, no obligation.